• small-img
  • small-img
  • small-img
  • small-img


802.11ax Indoor Wireless Access Point

> 802.11ax Indoor Wireless Access Point.

> Internal Antennas 6 Streams Triple Radio.

> Up to 3.267 Gbps access rate.



> RF Optimizing Engine.

> Maximum transmit power up to 20 dBm.

> Antenna gain up to 5 dBi.

  • Caractéristiques
  • Accessoires
  • Téléchargement
  • Hardware

    Weight (excluding mounting accessories)

    0.94 kg (2.07 lb)

    Dimensions (excluding mounting and accessories)

    210 mm × 210 mm × 45 mm (8.27" × 8.27" × 1.77") (L × W × H)

    Ethernet Ports

    1 x 100M/1000M/2.5Gbps Base-T RJ-45

    1 x 100M/1000 Mbps Base-T RJ-45


    Port1 (2.5GE): 802.3at/802.3af

    Port2 (GE): PSE, 802.3af

    Local Power Supply

    54 VDC


    Built-in omni-directional antenna

    Radio 1 : 5dBi antenna gain @ 5G

    Radio 2 : 5dBi antenna gain @ 5G

    Radio 3 : 5dBi antenna gain @ 2.4G or 5dBi antenna gain @ 5G

    Working Frequencies

    802.11ax/ac wave2/ac/n/a: 5.725 GHz–5.850 GHz; 5.47 GHz–5.725 GHz; 5.15 GHz–5.35 GHz

    802.11ax/b/g/n: 2.4 GHz–2.483 GHz

    MIMO-OFDM (11n): MCS 0-31

    MIMO-OFDM (11ac): MCS 0-11

    MIMO-OFDM (11ax): MCS 0-11

    Modulation Mode

    11b: DSS: CCK@5.5/11 Mbps, DQPSK@2 Mbps, DBPSK@1Mbps

    11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24 Mbps, QPSK@12/18 Mbps, BPSK@6/9 Mbps

    11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM

    11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM

    11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

    Maximum Transmit Power

    20 dBm

    Reset/Restoration To Factory Default


    State LED

    Alternating flashing mode, orange/green/blue for different working states, breathing mode



    Working Temperature

    –10 °C to 55 °C (14 °F to 131 °F)

    Storage Temperature

    –40 °C to 70 °C(–40 °F to +158 °F)

    Working Humidity

    5%–95% (non-condensing)

    Storage Humidity

    5%–95% (non-condensing)

    Protection Class






    Software specifications


    Compliant with 802.11a/b/g/n/ac/ac wace2/ax

    Working Frequencies And MIMO

    1. 5G (1) 2*2 MIMO 1.2 Gbps+5G (2) 2*2 MIMO 1.2 Gbps+5G (3) 2*2 MIMO 0.867 Gbps

    2. 5G (1) 2*2 MIMO 1.2Gbps+5G (2) 2*2 MIMO 1.2 Gbps+2.4G 2*2 MIMO 0.4 Gbps

    3. 5G (1) 2*2 MIMO 1.2Gbps+2.4G 2*2 MIMO 0.575 Gbps+5G(2) 2*2 MIMO 0.867 Gbps

    4. 5G (1) 2*2 MIMO 1.2Gbps+2.4G (1) 2*2 MIMO 0.575 Gbps+2.4G (2) 2*2 MIMO 0.4 Gbps


    20 MHz/40 MHz/80 MHz

    WLAN Basics

    Maximum number of clients per radio: 512

    Virtual APs: 32

    Open system/shared key authentication

    Broadcast probe request acknowledge control

    Concurrent login of WPA, WPA2, WPA3 and Pre-RSNA users



    802.11k and 802.11v smart roaming

    802.11r fast transition roaming

    Advanced Traffic Management

    Restrict low rate/sticky terminals access

    Channel reuse

    Receiver sensitivity adjustment

    Automatic channel/power/bandwidth adjustment

    Hide SSID

    Hotspot 2.0

    Security Policy

    WEP-64/128/152bit, dynamic WEP, TKIP, AES, EAP, CCMP , WPA3

    Multiple triggering conditions for unicast and broadcast key update

    Support 802.11i

    802.1X authentication, MAC authentication, PSK authentication, Portal authentication, PPSK

    Layer 2 user isolation

    SSID-based user isolation

    Packet filtering

    MAC address filtering

    Broadcast storm suppression

    Wireless EAD

    SSID and VLAN binding

    Rogue device detection and countermeasure

    Dynamic ARP Inspection

    IP Source Guard (IPSG)


    Management frame protection (802.11w)


    RADIUS client

    Multiple-domain authentication server

    Backup authentication server

    Layer 2 And Layer 3 Features

    IP address configuration: Static IP (available only in fat AP mode)/DHCP assigned IP (Option 60)

    IPV6: Native IPv6/IPv6 Portal/IPv6 SAVI

    ACL: IPv4/IPv6

    Local forwarding based on SSID and VLAN

    Link Layer Discovery Protocol (LLDP)

    SSID-based VLAN assignment

    EoGRE Tunnel

    Multicast: IGMP Snooping/MLD Snooping


    802.11e: Wi-Fi Multimedia (WMM)

    802.1p priority and marking on Ethernet ports

    Priority mapping for wired and wireless packets

    SSID/VLAN and QoS policy mapping

    Layer 2 to Layer 4 packet filtering and traffic classification


    Client bandwidth management

    Traffic-based load balancing

    Session-based load balancing

    Frequency-based load balancing (supports dual-band)

    Band navigation (5G priority)

    Multicast optimization (IPv4/IPv6)

    Call Admission Control (CAC)

    Airtime optimization

    Airtime fairness

    Layer 4-7 application identification

    SVP Phone

    Per-packet power control (PPC)

    Management And Maintenance

    AP Working Mode: Fit/Fat

    Network management:Trap, HTTP(S), SSH, Telnet, FTP/TFTP, SNMP V1/V2/V3 only applicable in Fat mode

    Management SSID


    Remote probing and analysis