Home
ITRTSC-072B-HS_View_Front-logo.png
ITRTSC-072B-HS_View_45left-logo.png
ITRTSC-072B-HS_View_45Right-logo.png
ITRTSC-072B-HS_View_Rear-logo.png
ITRTSC-072B-HS_View_45Right-logo.png
ITRTSC-072B-HS_View_Rear-logo.png
ITRTSC-072B-HS_View_Front-logo.png
Compare Favourite
ITRTSC-072B-HS

Dahua Traffic Signal Controller

Key Points
    • Supports 72-channels Signal Light Access
    • Self-adaptive Flow Control
    • Flexible modular design
    • IP66 Waterproof
    • Main Control system with millisecond-level hot standby switching
    • EN50556 Certified
    • Easy-to-use management interface

Specifications

Function

Signal Switch

GB-14886

Display Screen

LCD screen: Supports displaying time, phase direction, phase number, phase countdown, phase total time; searching for fault and software information; configuring cycle scheme, control mode, time and date, and network

Flasher

Standard hardware flasher, independent on program control

Flashing Yellow

Flashing yellow during failure

Channel

6 output boards, supporting 72 channels

Phase

16 parent phases and 16 overlap phases. Supports repeat running of parent phase, meeting requirements of repeat timing in a cycle and independent parameter settings; Separately set parameters of phase for cycle schemes and repeated phase. Each cycle scheme can be set with different phase parameters

Signal Group Output

24 groups of independent signal output

Cycle Scheme

Up to 54 cycle schemes

Multi-period Timing

Up to 112 daily schemes, 48 pretimed periods, 20 weekly schemes, 30 daily dispatch schemes, and 30 special dispatch schemes

Pedestrian Crossing

Input of up to 8 pedestrian pushbuttons

Actuated Control

Up to 16-channel coils and 64-channel traffic enforcement cameras. Two detecting devices can be used for detecting one lane

Signal Control Mode

Manual control, pretimed control, cableless linking control, actuated control, adaptive control, and pedestrian crossing coordination control

Manual Control

Manual control through LCD screen, wireless remote control, and remote control through host computer to meet on-site requirements

Change of Control Modes

Switches between manual control and automatic control, meeting minimum safety time and smooth signal switch

Cableless Link Control

Yes. Coordination control is realized by GPS time synchronization and setting offset

Special Mode Control

Supports special mode control

Two-intersection Control

Supports control of two intersections

Temporary Scheme

Supports configuring or clearing temporary schemes through platform

Waiting Area

Yes

Default Light Color

Default light colors include all red, flashing yellow, light off, and red flashing. Default light color displays when no phase is running in a scheme or no channel is configured

Special Status

Supports special status control of traffic lights, such as all red, yellow flashing, light off, and red flashing

Count down

Self-learning, pulse, and RS-485 communication countdown timers. Supports setting baud rate when using RS-485 communication countdown timer

Network Status Monitoring

NTP, GPS, network sync, manual time adjustment

Hot Standby of Main Control

Yes

Signal Control Duration

Adjustable

Auto Phase Timing

When adjusting a cycle, set the total cycle length, and the phases will be timed automatically according to the split (the ratio of phase time and cycle length in a cycle)

Failure Detection

Degradation mechanism in case of green conflict and light fault; fault information upload and search

Access Control Monitoring

Supports door open/close monitoring and reporting

Network Control

Communicates with host computer through network; supports setting temporary scheme and special tasks

Information Security

Supports identity authentication, control order verification, update verification of operation parameters, and broadcast storm protection

Parameters Configuration

Supports setting control parameters on PC client and remote server

Update

Supports network upgrade, USB/TF card upgrade

Lighting

Support lighting (includes a port for the light inside the cabinet)

Voltage Monitoring

Monitoring and display of input voltage, input current, and overall power consumption

Auto Maintenance

yes

Temperature and Humidity Monitoring

Detects and reports temperature and humidity

Low Voltage Downgrade

Supports low voltage downgrade

Startup Sequence

Configures start sequence

Port

Control Switch

1 main power switch and leakage protection, 1 controller switch, 1 signal light control switch, 1 flasher switch, 1 socket switch with a reserved port

Power Input

1 power input

Network Port

Three 10/100M Ethernet ports (RJ-45): One electrical port on main control board, and two electrical ports on communication board

RS-232

4

RS-485

4 ports, 2 are dedicated for countdown timers

USB

2

TF Card

2

GPS

2

Alarm Input

14 (pedestrian pushbutton input port included)

Alarm Output

10 (pedestrian pushbutton output port included)

General

Power Supply

220 VAC ± 30%, 50 Hz ± 2%

Insulation

Insulation resistance ≥10 MΩ

Voltage Withstanding

1,500 VAC, 50 Hz (1,500 VAC, 50 Hz voltage is applied between the power electrode or other conductive circuits connected to the power electrode and easily accessible parts such as cabinets and installation casing)

Power Consumption

≤60 W (no load)

Drive Power

≤550 W

Operating Temperature

–40 °C to + 80°C (–40 °F to 176 °F)

Operating Humidity

10%–95% (RH), non-condensing

Protection

IP54; Mains lightning protection; network lightning protection; electromagnetic immunity (no electrical failure in electromagnetic disturbance environments such as electrostatic discharge, fast electrical transient bursts, surges, and short-term voltage interruptions); waterproof (passed rain test. The signal controller works normally during and after the test, and there is no water seepage or accumulation inside the signal controller); dustproof (during and after the dust test, the signal controller works normally, and there is no large amount of dust inside the signal controller); corrosion (the signal controller works normally after the salt spraying test, and there is no serious corrosion of metal components such as the signal controller casing and internal rack); passed vibration test and steel ball impact test

Anti-corrosion Level

Moderate Protection

Product Dimensions

Without antenna cover: 670.0 mm × 531.0 mm × 1,338.3 mm (26.38'' × 20.91'' × 52.69'') (L × W × H);
With antenna cover: 670.0 mm × 531.0 mm × 1,383.0 mm (26.38'' × 20.91'' × 54.45'') (L × W × H)

Packaging Dimensions

823.0 mm × 726.0 mm × 1,634.0 mm (32.40" × 28.58" × 64.33")

Net Weight

≤115.0 kg (253.53 lb)

Gross Weight

≤125.0 kg (275.58 lb)

Certifications

Meets GB/T 20999-2007, GB/T 20999-2017, and NTCIP protocols

Installation

Floor-standing cabinet

Remote control

Optional

RF433M Modulation Type

FSK

RF433M Frequency Range

433.05 MHz–434.79 MHz

RF433M Power Transmission

10 mw (EIRP)

* Limited to a maximum of 4 products
Reset
Compare

Document Info

  • Software Name
  • Software Size
  • Supported Models
  • MD5
  • SHA256
Release Notes Download

DAHUA SOFTWARE LICENSE AGREEMENT

DAHUA SOFTWARE LICENSE AGREEMENT
1. PREAMBLE
IMPORTANT NOTICE, PLEASE READ CAREFULLY: 1.1 This Agreement is a Software License Agreement between you and Zhejiang Dahua Technology Co.,Ltd. (hereinafter referred to as “Dahua”). Please read this software license agreement (Agreement) carefully before using the Software. By using Dahua Software, you are deemed to agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, please do not install or use the Software, and click the “disagree” button(If there is any provision for "agree" or "disagree"). If the Software you get is purchased as part of Dahua device, and you do not agree to the terms of this Agreement, you may return this device/Software within the return period to Dahua or authorized distributor where you purchased from for a refund, but it should be subject to the Dahua’s return policy.

2. DEFINITIONS
“Software” refers to information processing program(s) or supporting file(s) consisting of a number of modules or functions. Supporting file(s) includes all or part of the Software source codes, object codes, and the images, photographs, icons, animations, audio, video, music, words and codes incorporated therein. It also includes all relevant paper or electronic information and technical documentation which describe the functions, characteristics, contents, quality, tests, customer manuals, user agreements, etc. (hereinafter referred to as “Software Products” or “Software”). 
“You” refers to natural person or legal entity that has obtained the right to use the Software under the license of Dahua. Legal entities include company, enterprise, institution, organization or work unit.
“Probation period” refers to a specific period before the official registration in which Dahua authorizes the internal use of users for evaluation purpose.

3. SOFTWARE LICENSE
Subject to your compliance with this Agreement, you are granted non-exclusive license including: 1) Probation license You are granted to install the software on a single device controlled by you and use all the functions provided for evaluation purpose for free.
2) Commercial license a) Right of installation and use: You are granted to install and use the software on a single device you control, and use all the functions provided thereby. b) Back-up: You are granted to reproduce materials for archival purpose. Unless otherwise stated in this Agreement, you may not be permitted to copy the software or printed materials or electronic documentations accompanying for any other purposes and by any other means.

4. PERMITTED LICENSE USES AND RESTRICTIONS
1) Restrictions on single use This Agreement does not allow the software to exist on more than one device at a time, unless otherwise agreed by both parties.
2) Restrictions on software sharing You may not use part or all of the software on multiple devices by sharing all or part of the Software.
3) Restrictions on software decomposition You can not use different functionalities on different devices or embed different parts of the Software into other software system by decomposing the Software.
4) Restrictions on integrity preserving You can not remove any copyright statement or notice in the Software, nor smear, modify or delete any trademarks or logos appearing in the Software.
5) Restrictions on reverse engineering, decompile and disassemble You can not reverse engineer, decompile or disassemble the Software.
6) Abidance by the law: You agree to use the Software and/or the Services in compliance with all applicable laws, including local laws of the country or region in which you reside or in which you download or use the Software and Services. Functions and services of the Software may not be available in all languages in all regions. Internet connection is required for some functions of the Software and Services.
7) Confidentiality restriction: You may not disclose the performance of the software, or any other assessment, test results, technical secrets or any such confidential information derived from the Software to any third party without the written consent of Dahua
8) Automatic updates The software will periodically check with Dahua for updates. The update will automatically download and install onto your device, if one is available. It is deemed to accept the automatic download and installation onto your device once you used the Dahua software. You can turn off the automatic updates at any time by changing the Automatic updates settings.

5. DECLARATION ON INTELLECTUAL PROPERTY
1) The Software is developed by Dahua. Dahua reserves all the lawful rights of the software which are not expressly granted to you .
2) The Software is protected by laws of the People’s Republic of China. Pursuant to this Agreement, You are only granted a nonexclusive license to use the Software, but not sell or transfer of the Software.
3) Trademark: This Agreement does not grant to you any right related to any trademark(s) or service mark(s) of Dahua or its supplier(s).
4) All intellectual property rights involved in the Software, including but not limited to patents, copyrights, trademarks, trade secrets and technical secrets, remain vested with their respective owners. Dahua reserves the right to profit from its intellectual properties. Furthermore, for any contents not contained in the Software but can be accessed by using the Software, its title and intellectual property rights remain vested with their respective owners and may be protected by applicable copyrights or other intellectual property laws and treaties.
5)You further acknowledge and agree that all intellectual property rights regarding any improvements, modifications or adjustment to the software, arising directly or indirectly by using the software, shall vest in Dahua.

6. TECHNICAL SUPPORT
For any queries or problems arising in the Software installation and use, please contact Dahua for a prompt solution.

7. Transfer
If the Dahua Software you obtained is preinstalled on Dahua device , You may make a one-time permanent transfer of all of your license rights (in its original form) to a third party, provided that: (i) the Software transfer must be accompanied by your Dahua device; (ii) the transfer must include all of the Dahua Software, including all its component parts, printed materials and this Agreement; (iii) you can not retain any copies of the Software, including copies stored on the computer or other storage device; (iv) the party receiving the Software agrees to accept the terms and conditions of this Agreement. An updated version of Dahua Software is deemed to be part of Dahua Software, and can not be transferred separately from the previous version.

8. DISCLAIMER OF WARRANTIES
8.1 You are responsible for the risks resulting from accessing to internet, including but not limited to, cyber-attacks, hacker attacks, computer virus and etc. Please protect your network, data and personal information by taking necessary actions, including but not limited to modifying the factory default password and using a strong password, periodically changing the password, updating the firmware to the latest version, and so on. Dahua do not bear any responsibility for any dysfunction, information leakage or other problems.
8.2 If you are a consumer client (using the Software outside of your trade, business or profession), you may have legal rights in your country of residence which would prohibit the following limitations from applying to you, and if prohibited they will not apply to you. To find out more about rights, you should contact local consumer consulting organizations.
8.2.1 You expressly acknowledge and agree that, to the extent permitted by applicable laws, the use of the Software and any Service performed by or accessed through the Software is at your sole risk and that the entire risk as to satisfactory quality, performance, accuracy and effort is with you.
8.2.2 To the maximum extent permitted by applicable laws, the Software and Services are provided “as is” and “as available”, with all faults and without warranty of any kind, and Dahua hereby disclaim all warranty and conditions with respect to the software and services, either express, implied or statutory, including, but not limited to, the implied warranties and/or conditions of merchantability, satisfactory quality, fitness for a particular purpose, accuracy, quiet enjoyment, and not-infringement of third party’ rights.
8.2.3 Dahua does not warrant against interference with your enjoyment of the Software and Services, that the functions contained in, or services performed or provided by the Software will meet your requirements, that the operation of the Software and Services will be uninterrupted and error-free, that any Service will continue to be made available, that defects in the Software or Services will be corrected, or that the Software will be compatible or work with any third party software, applications or third party services.
8.2.4 No oral or written information or advice given by Dahua or an authorized representative of Dahua shall create a warranty. Should the Software or services prove defective, you assume the entire cost of all necessary servicing, repair or correction. Some jurisdictions do not allow the exclusion of implied warranties or limitations on applicable statutory rights of a consumer, so the above exclusion and limitations may not apply to you.
8.3 If you obtain this software from a method other than Dahua's official path, Dahua does not recognize the software as the official version, cannot guarantee that the software can be used normally, and is not responsible for any loss caused by it. 

9. LIMITATION OF LIABILITY
To the extent not prohibited by applicable laws, in no event shall Dahua, its affiliates, agents or principals be liable for personal injury, or any incidental, special, indirect or consequential damages whatsoever, including, without limitation, damages for loss or profits, corruption or loss of data, failure to transmit or receive any data, business interruption or any other commercial damages or losses, arising out of or related to your use or inability to use the Software and Services. Some jurisdictions do not allow the exclusion or extension of limitation of liability for personal injury, or of incidental or consequential damages, so this limitation my not apply to you. In no event shall Dahua’s total liability to you for all damages (other than may be required by applicable laws in cases involving personal injury) exceed the amount of money you spent on device. The forgoing limitations will apply even if the above stated remedy fails of its essential purpose.

10. TERMINATION
This Agreement is effective until terminated. Your rights under this Agreement will terminate automatically or otherwise cease to be effective without notice from Dahua if you fail to comply with any term(s) of this Agreement. Upon the termination of this Agreement, you shall cease the use of the Software, delete all contents that have been copied or installed on devices and backup copy(s). Section 1.2,8,9,12,13 of this Agreement shall survive any such termination. You should be liable for any loss arising from your breach of the provisions of this Agreement to Dahua.

11. EXPORT CONTROL
You must comply with the national exportation/importation laws, as well as the end-users, end-use, and destinations restrictions applicable to the Software. Without the prior approval or permission of the necessary government authority, you may not export or re-export the Software, directly or indirectly, to any countries/regions that is subject to export restrictions. This obligation shall survive the termination of this Agreement.

12. CONTROLLING LAW AND SEVERABILITY 
The interpretation, validity and dispute settlement of this Agreement shall be governed by the laws of the People’s Republic of China. If a court of judicial jurisdiction finds any provision, or portion thereof, to be unacceptable, the remainder of this Agreement shall continue in full force and effect. Any disputes arising out of or in connection with this Agreement, the parties shall agree to submit to the People’s Court where the jurisdiction of Dahua is settled. 

13. COMPLETE AGREEMENT; GOVERNING LANGUAGE
This Agreement includes the terms of the Agreement, other agreements expressly invoked in this Agreement, the various rules that may have been issued or may be issued in the future by Dahua, which are integral parts of this Agreement and shall have the same legal effect as it. Unless otherwise stated expressly, users who use the Dahua software are subject to this Agreement. No amendment to or modification of this Agreement will be binding unless in writing and signed by Dahua. Any translation of this Agreement is done for local requirements. In the event of a dispute between the Chinese and any non-Chinese versions, the Chinese version of this Agreement shall govern, to the extent not prohibited by local law in your jurisdiction.

14. OTHERS
This Agreement may be updated by Dahua at any time, and the updated terms of the Agreement shall take the place of the terms of the original Agreement once published in Dahua’s official website. If you do not accept the revised term(s), please stop using the software immediately. Your continued use of the Software will be deemed to have accepted the updated agreement.

Confirm